RCP-160E

Capacity : 160L
Temperature Control Range:RT+5-60℃
Temperature Control Accuracy:±0.1℃

Carbon Dioxide Incubator Feature:
  • The six-sided heating method ensures a uniform temperature distribution throughout the entire incubator, and after stabilization, the temperature uniformity within the incubator reaches ±0.4℃.
  • The 90℃ high-temperature and humid sterilization system can effectively eliminate various microorganisms such as bacteria, molds, and mycoplasma on the inner surface of the container, thereby preventing microbial contamination that may affect cell culture and providing a safe experimental environment for users.
  • The CO2 intake port is equipped with an efficient microbial filter. For particles with a diameter of 0.3 μm or larger, the filtration efficiency is as high as 99.99%, effectively filtering bacteria and dust particles in the CO2 gas.
  • Intuitive control is easy to operate. It can display real-time operation curves. The historical operation curves are located on the upper part of the outer door, which is convenient and easy to control. The touch control is sensitive and the operation experience is good. There are sound and visual alarms, screen menu prompts, and the alarm records can be queried.
  • Infrared (IR) CO2 sensor, which can stably monitor the cultivation environment, effectively avoids the measurement deviation caused by frequent opening and closing of doors and locks.
  • The incubator is equipped with a fan to assist in air circulation, ensuring that all cells, regardless of their placement, have the same environmental conditions and will not lose water excessively when the incubator is turned on.
  • The design of the base reservoir ensures a large evaporation area, and the humidity recovers quickly after closing. It guarantees a high humidity environment inside the incubator. Under normal room temperature conditions, even when high humidity is generated, condensation is unlikely to occur above the cabin.
  • Historical data can be viewed, monitored and exported via USB interface. The historical data cannot be modified and can truly and effectively trace the original data.
Carbon Dioxide Incubator Specification:
Product Type Carbon dioxide incubator
Model number RCP-160T
Display mode 7-inch touch screen
Temperature control range Room temperature+ 5 – 60℃
Temperature sensor PT100
Temperature control accuracy ±0.1℃
Temperature control fluctuation degree ≤±0.2℃
Temperature uniformity ≤±0.4℃(at 37℃)
Temperature recovery time (1 minute after opening the door) ≤ 5 minutes
CO2 control range 0-20%
CO2 control accuracy ±0.1%
CO2 concentration sensor Imported infrared (IR) sensor
CO2 alarm ≥ ±0.1% (adjustable)
CO2 intake filtration efficiency 99.99%
CO2 recovery time (1 minute after opening the door) ≤ 6 minutes
Humidification method Natural evaporation
Relative humidity 85%RH
Distilled water capacity 4L
Inner tank structure Four curved sides, reservoir-shaped at the bottom
Sterilization method Available with 90℃ high-temperature and high-humidity environment / UV ultraviolet disinfection option
High-efficiency filter at the air inlet 1 unit
Power supply AC220V50/60Hz
Rated power 800W
Overall dimensions (mm) 675*695*975
Inner liner dimensions (mm) 480*480*698
Volume 160L
Standard partition quantity 3 pieces
Maximum partition quantity 12 pieces
Optional accessories Humidity display, printer, monitoring software

Reviews

There are no reviews yet.

Be the first to review “RCP-160E”

Your email address will not be published. Required fields are marked *

Shopping Cart