Light Incubator Feature:
- Equipped with a fresh air system, it provides clean, constant temperature and humidity, and directional airflow for the research environment.
- Intelligent electromagnetic valve defrosting system, with high on-off accuracy, can quickly switch between the refrigeration and defrosting circuits
- The brightness of the light panel can be controlled independently, allowing for adjustment to meet different lighting requirements.
- Electronic PID control, with programmed multi-stage settings;
- Intelligent operating system, high-performance processor, simple and user-friendly operation;
- Equipped with a 7-inch LCD touch screen and an easy-to-understand menu operation guide;
- Data recording and storage function: It can store 3 years of experimental data (recorded once per minute). The original data can be exported via USB drive and cannot be modified.
- Capacitive temperature sensor, precise and reliable, requires nomaintenance;
- You can view historical temperature data or real-time curves (in the last 8-10 hours);
- The right side of the box is equipped with a standard test hole with a diameter of 35mm.
- Audit tracking and data tracing function: It can store 16,000 operation and alarm logs, and the data is stored within the system. It can be exported via a USB drive and cannot be modified.
- Permission management: The administrator can create five users and assign different permissions to them.
- It has the function of multi-point temperature correction, which avoids the non-matching of multi-point temperature lines.
- Using a variable-frequency compressor, it saves energy, has small temperature fluctuations, and the door opening and closing recovery is fast.
- Recessed door design, with tempered glass on the inner door, allowing direct observation of the test situation inside the laboratory.
- The box is equipped with standard communication interfaces such as USB and RS485, RS232, which can be integrated into the LIMS system.
- Menu switching function between Chinese and English.
Light Incubator Specification:
| Product model | RLCD-1000C |
| Volume | 1000L |
| Circulation mode | Mandatory convection |
| Operating temperature range | With light: 10℃ – 65℃; Without light: 0℃ – 65℃ |
| Temperature resolution | 0.1℃ |
| Temperature fluctuation degree | ±1℃ (at 37℃) |
| Temperature distribution accuracy | ±1.5℃(37℃) |
| Illuminance (LX) | 0 – 30,000 LX (Supports multiple lighting modes) |
| Workroom | 304 brushed stainless steel |
| Shell | Galvanized sheet electrostatic spraying |
| Light barrier | Standard 3-layer full-spectrum LED lamp panel |
| Heater | Stainless steel heating tube |
| Compressor | Uses variable-frequency compressor |
| Rated power | 1190W |
| Refrigerant | R134A |
| Defrosting mechanism | Automatically |
| Temperature control method | Program control |
| Temperature setting method | Touch screen settings |
| Temperature indication method | 7.0-inch touch screen display |
| Operating function | Fixed-value operation, timed operation, automatic start/stop / appointment start, program control |
| Program mode | 100*5 program control |
| Sensor | PT100 temperature sensor |
| Safety device | Overheating will automatically cut off the heating, and if the temperature is consistently too low, the refrigeration system will be shut down to protect the samples; the circuit has self-diagnostic function. |
| Inner tank dimensions (mm) | 1300*650*1400 |
| Overall dimensions (mm) | 1400*800*1980 |
| Number of doors | Double doors |
| Load-bearing capacity of the partition board | 15kg |
| Power supply | 220V50HZ |
| Can be equipped with accessories | Lighting partition, printer, wireless SMS alarm system |
| Additional functions | Appointment for power on/off, query of historical temperature data curves, data storage and export via USB drive, key lock of deviation correction menu, power outage compensation, power outage memory, loop self-diagnosis, intelligent defrosting |





Recenzoj
Ankoraŭ ne estas recenzo.